RSS

How to Fix common printer problems

If you have a printer, you have to face some technical problems that may have been disturbing all your work. Here are some common printer problems encountered:


- Printer spooler services is not running
- Issues Paper Jam
- Power cable issues
- Cartridge does not work
- Paper roll out of the printer is completely empty
- Printing results are not marked
- Driver failure

About 90 percent of the problems associated with an error printer interface / configuration error and special effects. The possibility of mechanical error is extremely rare.

Interface and configuration problems arise if there are problems in the network and you may get an error like, the printer is not found. There are two possible reasons, probably will not get the identification by your operating system or there may be compatibility issues associated with the hardware. Please follow these steps:

1. verify the USB cable is a cross, which is used to connect the printer to your computer. You should replace it if there is damage caused to it.

2. Make sure that your printer is being identified by your computer. From the main Windows menu, select "Printers and Faxes" option and follow the steps to add your USB printer. Even if your printer is not recognized by your computer, then it means your printer software may be damaged. Therefore, you need to download from the original site or from CD.

3. Check with your printer settings to default status.
Here are some of the problems that can fix your own:

4. Paper Jam: Usually it happens when more than one sheet of paper stuck in the printer. You can gently lift the cover of your printer and pull them out.

5. Ink problems: Check the ink levels in ink cartridges and refill it.

6. Cartridge blocked, This is the most common mistakes, when head cartridge clogged with dried ink. You can fix it with a simple command like: Control Panel> Printers> Right Click> Properties> Maintenance> Clean Cartridges.

7. Driver failure, you can check your device manager, if there is any conflict associated with that driver will be reflex out warning signs. This shows there is some fault in the printer driver and need to be replaced. You can make clean when installing the drivers. Printers> Right Click> Properties> Update Driver "" style = "background-color: rgb (255, 255, 255);"> Or, you can choose to update your printer driver with the command: "Control Panel> Printers> Right Click > Properties> Update Driver "

Now, you have to understand that most problems can be solved easily at the level of ordinary people without the help of any technical support or technician. However, you can also avail the services of technicians related to some providers of technical support to fix your printer such as printer problems Printer Repair Includes driver installation, the printer network setup, test the printer

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

0 comments:

Post a Comment